How Do I Setup My Netgear WiFi Range Extender?

If your home WiFi signal is unable to reach in all corners of your house or the connection goes instantly at certain places then you are not the only one. This is very common issue and that to especially in large homes or places with thick walls. Here comes the Netgear WiFi range extender which solves this problem and provides strong and stable WiFi network across your home.

This guide is very simple and will help you to understand how to setup your Netgear WiFi range extender in the right way.

Step-by-Step: Setup for Your Netgear WiFi Range Extender

Lets make it simple so that anyone can follow even if you are not having any technical knowledge.

1. Unbox and Place the Extender

The very first step is to take extender out of box.

• Unbox your Netgear WiFi range extender.

• Plug it into a power socket in between your router and the area with poor WiFi.

• Make sure that the location should not be far away from the router. If the extender is unable to catch a strong signal, it wont boost anything.

Tip: A spot with 3 to 4 bars of WiFi from your router is usually perfect.

2. Wait for Power Light

Once plugged in, give it a moment.

• The power LED should turn solid green or white depending on model.

• If the light turns to red then unplug it and wait for 10 seconds and try after.

The lights will tell you a lot.

3. Connect to the Extenders Network

Now make sure to open your phone, laptop or tablet.

• Go to WiFi settings.

• Look for a network name.

• Verify to connect to that network.

You dont have internet at this moment and which is completely fine.

4. Open the Setup Page: mynetgear 192.168.1.250

Once connected to the extender network, open a browser may be Chrome, Firefox or Safari which is suitable. Type mynetgear or 192.168.1.250 in the address bar of a browser. And after that hit enter.

This will take you directly to the Netgear setup portal. It may ask for login credentials.

Default credentials:

• Username: admin

• Password: password

If this does not work then check your extenders manual or reset it to factory settings. Now you will enter the configuration page.

5. Follow the Setup Wizard

The Netgear WiFi range extender setup wizard will guide you from here.

• Select your home WiFi network from the list.

• Confirm to enter the WiFi password whenever asked. Enter your WiFi password when prompted.

• Verify whether you want the same WiFi nme or want to change that.

Tip: If you keep the same name then switching between networks becomes easy. But if you want to identify which signal is coming from the extender, give it a slightly different name.

After confirming the settings, the extender will reboot. This can take a minute.

6. Reconnect to Your New Extended Network

Once rebooted, go back to your devices WiFi settings.

• You will now see your extended network.

• Connect to it with the use of same password which you use for your main WiFi (unless you changed it in the previous step).

You should now have a stronger and more stable internet connection.

What If You Cant Access mynetgear or 192.168.1.250?

This is a common issue.

If typing of the mynetgear 192.168.1.250 does not work:

• Confirm that you are connected to the extenders network.

• Make sure to clear the browsers stored data.

• Try a different browser or device.

• If all else fails then reset the extender by pressing the reset button usually a pinhole for about 10 seconds.

After that, repeat the setup process.

A Quick Note on Firmware

Once your Netgear WiFi range extender is up and running, it is a good idea to check for firmware updates.

• Go back to mynetgear or 192.168.1.250.

• Log in.

• Look for Firmware Update under settings.

If you keep your device updated then it helps to fix errors, improve speed and enhance security.

Some Useful Tips for Better Range

A good setup depends on more than just steps. Here are some useful tips which enhance the range:

• Avoid placing extender behind the corners, cupboard and metal objects. These block signals.

• Do not place extenders too far from the router. If it catches a weak signal, it will create interference.

• Remember, it is not always about distance but it is about the quality of signal the extender receives.

Final Words

Setting up of a Netgear WiFi range extender might sound technical, but it really isnt when you take it one step at a time. The most important tools in this process are the right address either mynetgear or 192.168.1.250. These take you to the setup page. After the process you will enjoy a better, stronger and smoother internet everywhere in your home.